A practical topic in current tooling guidance
EROWA’s official presetting overview describes measuring workpieces and electrodes outside the machine. System 3R’s Wire EDM tooling overview also identifies off-machine presetting as an approach to machine-capacity utilisation. These are established workflow principles, not a new product announcement.
For a mold shop preparing inserts, punches or small precision parts, the useful question is specific: which preparation tasks currently occupy the machine, and which could be completed at a suitable external station? A fixture purchase alone does not establish a transferable reference or a validated measurement process.
Separate preparation from reference transfer
Preparing the drawing, checking the blank, identifying the fixture and planning access can happen before a job reaches the machine. Transferring measured offsets is a different task: it requires an appropriate reference interface, measurement procedure and a verified way to associate the data with the correct job.
Do not assume that an adjustable fixture is a calibrated presetting station, or that a holder automatically exchanges data with a CNC control. Check what the installed equipment actually supports.
A short review sheet for the next WEDM job
- Workpiece: record the blank shape, dimensions, material, clamping surfaces and cutting envelope.
- Mounting: identify the machine table or reference chuck, mounting pattern, fixture height and any adapter.
- Access: review the intended wire path, guide clearance and flushing arrangement with the machine documentation.
- Datum record: identify the locating surfaces, orientation, measuring tool and job identifier. Keep any approved offsets tied to that record.
- Acceptance: agree which checks are required after loading and who approves the first setup. Use the shop’s validated procedure and machine instructions.
For an initial trial, log preparation time, on-machine setup time and the checks required after transfer. Compare equivalent jobs before drawing conclusions. PLUS AUTO does not claim a fixed time saving from this checklist.
Choose the fixture around the workpiece and mounting
The published PLUS AUTO range includes the PA-16001Q V-shape wire-cut EDM holder for round or prismatic workpieces, the PA-16002Q three-axis adjustable jig, and the PA-16003Q fixed wire-cut EDM chuck listed for a 100 mm machine grid. They address different positioning tasks; they are not presented as a matched assembly or a complete presetting system.
Browse the EROWA-compatible WEDM tooling range, then send PLUS AUTO the proposed model, installed reference, mounting drawing and workpiece envelope for a product-specific compatibility review. A category label does not establish fit to every EROWA WEDM family or System 3R interface.
Our compatibility checklist helps organise the enquiry. Where a new external measuring station or digital offset transfer is required, involve the equipment supplier or qualified integrator separately.



