PA-10001A
Centering Plate 50
Corrosion-resistant Centering Plate 50 for mounting beneath compact electrode holders and blanks in an ITS-compatible setup.
View productCompatibility guide / 01
PLUS AUTO components for EROWA-compatible workholding.
Chucks, holders, pallets, chucking spigots and related components for ITS-compatible applications.
Send your current EROWA referenceReviewed range
81 EROWA-compatible products
Search by PLUS AUTO model, EROWA reference or product family.
81 products shown
PA-10001K
4-in-1 Tiny Pneumatic Chuck
Space-saving four-station pneumatic chuck for machining four compact workpieces in one setup.
View product
PA-10002A
Centering Plate 100
Centering Plate 100 for mounting larger electrodes, workpieces and fixtures on the ITS interface.
View product
PA-10002K
6-in-1 Tiny Pneumatic Chuck
Compact six-station pneumatic chuck for batch processing of small electrodes and precision workpieces.
View product
PA-10003A
Centering Plate G INOX
Ground corrosion-resistant G centering plate for larger workpieces, fixtures and gauges used in chip-removal machining.
View product
PA-10003K
9-in-1 Tiny Pneumatic Chuck
High-density nine-station pneumatic chuck for machining nine compact workpieces in a single program cycle.
View product
PA-12001M
D100 Manual Chuck
Manual D100 chuck corresponding to EROWA ER-036345 QuickChuck 100 P, with 10,000 N clamping force and four M8 mounting points.
View product
PA-12002M
D100 Manual Chuck with 125 × 125 Base
D100 manual chuck supplied on a 125 × 125 mm stainless-steel base for stable machine-table installation.
View product
PA-12003M
D100 Manual Chuck with CNC Base
D100 manual chuck on a dedicated CNC base for direct installation on machining-center tables.
View product
PA-12004M
D100 Manual Chuck with EDM Base
D100 manual chuck on an EDM-oriented base for sinking EDM and wire-cut applications.
View product
PA-12005M
Vertical D100 Manual Chuck
D100 manual chuck on a vertical base for side machining and setups that require the ITS interface to face horizontally.
View product
PA-12006M
Horizontal & Vertical D100 Manual Chuck
Dual-orientation D100 manual chuck assembly for horizontal and vertical workholding positions.
View product
PA-14001N
Manual Quick Chuck D50
Compact stainless-steel manual Quick Chuck D50 corresponding to EROWA ER-034387 for EDM, WEDM and light machining.
View product
PA-14002N
Quick Chuck 50 with Extension Rod
Manual Quick Chuck 50 with an extended rod for deep-cavity EDM and hard-to-reach features.
View product
PA-14003N
Vertical EDM Quick Chuck 50
Quick Chuck 50 on an adjustable vertical EDM base for side and angular electrode machining.
View product
PA-14004N
Quick Chuck 50 with Connection Rod
Quick Chuck 50 with a concentric round connection rod for adapting the ITS 50 interface to specific machine fixtures.
View product
PA-15001P
D4 Stationary Centering Sensor
Stationary D4 electrical-contact centering sensor for positioning workpieces on EDM machines, manufactured from Stainless Steel 420 with a tungsten-carbide ball.
View product
PA-15002P
D6 Stationary Centering Sensor
Stationary D6 electrical-contact centering sensor with a tungsten-carbide ball for visible and repeatable EDM workpiece positioning.
View product
PA-15003P
D8 Stationary Centering Sensor
Stationary D8 electrical-contact centering sensor with a larger tungsten-carbide ball for clear visibility during EDM workpiece positioning.
View product
PA-15004P
D4 Spring-Loaded Centering Sensor
Spring-loaded D4 centering sensor for automatic workpiece measurement, with X, Y and Z overrun protection.
View product
PA-15005P
Gauging Pin
Hardened and ground gauging pin for aligning the radial, axial and angular position of ITS chucks.
View product
PA-15006P
Parallel Gauging Pin
Parallel gauging pin with ground top and side datum surfaces for checking chuck alignment without rotating the tool.
View product
PA-15007P
Extended Checking Pin
Extended hardened and ground checking pin for radial, axial and angular alignment of ITS chucks.
View product
PA-16001Q
V-Shape Wire-Cut EDM Holder
V-shape holder for clamping round or prismatic workpieces during wire-cut EDM operations.
View product
PA-16002Q
3-Axis High-Precision Control Jig
Three-axis adjustable and continuously rotatable WEDM fixture for positioning workpieces before cutting.
View product
PA-16003Q
Fixed Wire-Cut EDM Chuck
Fixed wire-cut EDM chuck for mounting on a 100 mm machine grid, supplied with a stainless-steel operating handle.
View product
PA-16004Q
Adjustable WEDM Chuck
Angle-adjustable WEDM chuck for flexible and stable workpiece positioning in EDM and wire-cut applications.
View product
PA-17001R
Square EDM Holder
ITS 50 square EDM holder offered with 15 mm and 25 mm square slots for electrodes and workpieces.
View product
PA-17003R
ER32 Collet Chuck Holder
ITS 50 ER32 collet holder for round electrodes, workpieces and tool shanks.
View product
PA-17004R
Angle Clamping Unit
Angle-adjustable clamping unit for EDM and WEDM operations such as machining lateral sprues on casting tools.
View product
PA-17006R
Magnetic Pallet for ITS 50
Magnetic pallet adapted to the ITS 50 interface for holding suitable workpieces during EDM and CMM operations.
View product
PA-20001S
Manual Chucking Spigot
Manual ITS chucking spigot for mounting holders and pallets in manually operated compatible chucks.
View product
PA-20002S
Automatic Chucking Spigot
Automatic ITS chucking spigot for holders used with pneumatic chucks, robot handling and automated electrode change.
View product
PA-30001B
U15 Stainless Steel Holder
U15 Stainless Steel Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-30002B
U20 Stainless Steel Holder
U20 Stainless Steel Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-30003B
U25 Stainless Steel Holder
U25 Stainless Steel Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-30004B
U30 Stainless Steel Holder
U30 Stainless Steel Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-30005B
S15 Stainless Steel Holder
S15 Stainless Steel Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-30006B
S20 Stainless Steel Holder
S20 Stainless Steel Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-30007B
S25 Stainless Steel Holder
S25 Stainless Steel Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-30008B
S30 Stainless Steel Holder
S30 Stainless Steel Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-30009B
51 × 51 Flat Stainless Steel Holder
51 × 51 Flat Stainless Steel Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-30010B
81 × 51 Stainless Steel Holder
81 × 51 Stainless Steel Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-30011B
130 × 51 Stainless Steel Holder
130 × 51 Stainless Steel Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-30012B
150 × 92 Stainless Steel Holder with ITS 100
150 × 92 Stainless Steel Holder with ITS 100 for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The stainless-steel body is intended for durable workshop use.
View product
PA-40001C
U15 Brass Holder
U15 Brass Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The brass body supports good electrical conductivity during EDM.
View product
PA-40002C
U20 Brass Holder
U20 Brass Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The brass body supports good electrical conductivity during EDM.
View product
PA-40003C
U25 Brass Holder
U25 Brass Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The brass body supports good electrical conductivity during EDM.
View product
PA-40004C
51 × 51 Flat Brass Holder
51 × 51 Flat Brass Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The brass body supports good electrical conductivity during EDM.
View product
PA-40005C
S15 Brass Holder
S15 Brass Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The brass body supports good electrical conductivity during EDM.
View product
PA-40006C
S20 Brass Holder
S20 Brass Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The brass body supports good electrical conductivity during EDM.
View product
PA-40007C
S25 Brass Holder
S25 Brass Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The brass body supports good electrical conductivity during EDM.
View product
PA-40008C
81 × 51 Brass Holder
81 × 51 Brass Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The brass body supports good electrical conductivity during EDM.
View product
PA-50001D
U15 Aluminum Holder
U15 Aluminum Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The lightweight aluminum body is suited to graphite electrodes and weight-sensitive handling.
View product
PA-50002D
U20 Aluminum Holder
U20 Aluminum Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The lightweight aluminum body is suited to graphite electrodes and weight-sensitive handling.
View product
PA-50003D
U25 Aluminum Holder
U25 Aluminum Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The lightweight aluminum body is suited to graphite electrodes and weight-sensitive handling.
View product
PA-50004D
51 × 51 Flat Aluminum Holder
51 × 51 Flat Aluminum Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The lightweight aluminum body is suited to graphite electrodes and weight-sensitive handling.
View product
PA-50005D
S15 Aluminum Holder
S15 Aluminum Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The lightweight aluminum body is suited to graphite electrodes and weight-sensitive handling.
View product
PA-50006D
S20 Aluminum Holder
S20 Aluminum Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The lightweight aluminum body is suited to graphite electrodes and weight-sensitive handling.
View product
PA-50007D
S25 Aluminum Holder
S25 Aluminum Holder for mounting electrodes or workpieces in an EROWA-compatible ITS setup. The lightweight aluminum body is suited to graphite electrodes and weight-sensitive handling.
View product
PA-60002E
D72 ITS U20 Stainless Holder
D72 ITS U20 Stainless Holder with gripper-ready geometry for compatible ITS production and automation setups.
View product
PA-60003E
D72 ITS Flat Stainless Holder
D72 ITS Flat Stainless Holder with gripper-ready geometry for compatible ITS production and automation setups.
View product
PA-60004E
D72 ITS Solid Blank Stainless Holder
D72 ITS Solid Blank Stainless Holder with gripper-ready geometry for compatible ITS production and automation setups.
View product
PA-60005E
D115 ITS Reference Pallet
D115 ITS Reference Pallet with gripper-ready geometry for compatible ITS production and automation setups.
View product
PA-60006E
D148 ITS R25 Pallet
D148 ITS R25 Pallet with gripper-ready geometry for compatible ITS production and automation setups.
View product
PA-70001G
D100 Pneumatic Chuck with CNC Base
CNC-table D100 pneumatic chuck supplied on an integrated base plate for rapid workpiece and electrode change.
View product
PA-70002G
D100 EDM Pneumatic Chuck
D100 pneumatic chuck on an EDM-oriented base with integrated air cleaning.
View product
PA-70003G
D100 Pneumatic Chuck with 102 × 102 Base
D100 pneumatic chuck on a 102 × 102 functional base, corresponding to the EROWA ER-035519 mounting envelope.
View product
PA-70004G
2-in-1 CNC Pneumatic Chuck D100
Two-station D100 pneumatic chuck system for batch CNC machining and repeatable workpiece change.
View product
PA-70005G
3-in-1 CNC Pneumatic Chuck D100
Three-station D100 pneumatic chuck system for batch CNC machining and repeatable workpiece change.
View product
PA-70006G
4-in-1 CNC Pneumatic Chuck D100
Four-station D100 pneumatic chuck system for batch CNC machining and repeatable workpiece change.
View product
PA-70007G
6-in-1 CNC Pneumatic Chuck D100
Six-station D100 pneumatic chuck matrix for batch CNC machining and repeatable workpiece change.
View product
PA-70008G
9-in-1 CNC Pneumatic Chuck D100
Nine-station D100 pneumatic chuck matrix for high-density batch CNC machining.
View product
PA-70009G
Vertical D100 Pneumatic Chuck
D100 pneumatic chuck on a vertical base for side machining and horizontally facing ITS setups.
View product
PA-70010G
Horizontal & Vertical D100 Pneumatic Chuck
Dual-orientation D100 pneumatic chuck block for horizontal and vertical machining setups.
View product
PA-80001H
80 mm Square Pneumatic Chuck
Compact 80 mm square pneumatic chuck for EROWA-compatible electrode and mold manufacturing setups.
View product
PA-80002H
80 mm Square Pneumatic Chuck with CNC Base
80 mm square pneumatic chuck supplied on a CNC base for direct table mounting.
View product
PA-80003H
80 mm Square EDM Pneumatic Chuck
80 mm square pneumatic chuck on an EDM-oriented base for compact electrode and workpiece setups.
View product
PA-80004H
80 mm Square Pneumatic Chuck with Connection Rod
80 mm square pneumatic chuck with a connection rod for machine-specific mounting arrangements.
View product
PA-90001J
D150 Pneumatic Power Chuck
D150 high-force pneumatic Power Chuck for larger pallets and demanding machining setups.
View product
U0001
D72 ITS S25 Stainless Holder
D72 ITS S25 Stainless Holder with gripper-ready geometry for compatible ITS production and automation setups.
View productCompatibility essentials
Review these notes after finding a product.
Each product page identifies the compatibility basis and the setup details to confirm before ordering.
Compatibility basis
Direct-fit replacement
Critical interface and fit dimensions are confirmed for direct replacement.
Functional alternative
The stated use and interface are supported; appearance or features may differ.
Interface accessory
Designed to work in the stated interface without being a like-for-like replacement.
Before ordering
- 01PLUS AUTO and original model
- 02Chuck, holder and spigot combination
- 03Mounting dimensions and method
- 04Machine and application
- 05Required clearance
- 06Drawing and revision
Trademark and independence notice
EROWA product names and reference numbers are used only to identify compatibility. PLUS AUTO SOLUTION is an independent manufacturer and is not affiliated with or endorsed by EROWA.